Team PRP LMT Straight Jacket

Pre Order: shipping January.

CAUTION: Precision part for select uses. Read entire description. No returns.

The Team PRP 2.5mm carbon fiber servo Straight Jacket for the stock Losi LMT and select servos locks your servo in place without moving in it's mount! The Straight Jacket has ONLY been tested in the Losi LMT stock plastic servo mounts with Tekin, AGFRC and NSDRC 40mm wide servos. It is up to you to determine if it will fit. I will not accept returns on this item.

Specs: 40mm servo cutout space. Tight fit may require sanding for fit. 48.5mm hole spacing perfectly matches the Stock LMT plastic servo mount.

This brace spacer pushes the servo forward 2.5mm to allow the steering drag link to attach to the back side of the servo saver arm. You will need to determine if your servo saver and drag link have enough space*. It's up to you to figure that out.

*The Treal LMT servo savers will work with this mounting method on the Losi LMT with our FS Drag link mounted behind the servo horn. Simply place a lock nut in the Treal HD servo saver as normal, place the rod end of your drag link over that locknut with a button head or flat head screw coming out from behind the arm/horn and then use a locknut on the outside face (front) of the servo saver arm/horn (see photo 2). If using a Reefs HD Servo Saver this spacer will perfectly push your servo away from the mounting tray allowing for the Reefs HD Saver to move freely. Then attach the drag link in front of the arm/horn as usual. You may need an additional washer or spacer behind the rod end if the rod end binds with the horn.

Pricing and specifications subject to change while we continue to develop and advance our products.