LMT STL Shock Tower Upgrades

Upgrade your Losi LMT kits with advanced racing STL shock towers (outer chassis plates) from Team PRP. STL towers are for Shock To Link suspension setups ONLY such as the Losi TLR-Tuned LMT trailing arm suspension or Team PRP trailing arms. STL towers are compatible with STL Body Post Extensions if you need to move your front body posts further out away from the windshield. STL Body Post Extensions are also compatible with the S1 Ogre 1.5 shock towers.

STL V2 Towers:
STL Towers are compatible with Losi LMT kits when set up with Shock To Link Trailing Arm suspension. These are also a direct bolt on for the Ogre X, Goblin, Goblin X and Goblin Unum chassis kits when using trailing arm suspension.

•STL has 5 rows of holes optimized for 105 shocks down to shorter 90mm rear buggy shocks.
• Allows lower racing ride height with TLR Tuned 105mm shocks and other similar size shocks and you may now use shorter shocks in the 90-100mm range more effectively.
• Incorporates droop adjustments with the use of Limit strap mounting holes.
• Allows the use of the lighter weight 10mm x 60mm Losi LMT cross brace above the sway bar mounting hole.
• Lower body post mounting holes for slammed body setups with trimmed LMT body posts or normal height setups with stock LMT length posts. Body post extensions are available. They are an optional purchase here on this page.

STL INCLUDES
• 3mm Carbon Fiber shock towers x4
• M3x10mm screws x 16
• M3 Locknuts x8
• Link to instructions. See Instructions on our Support page

STL REQUIRES
• Additional Mounting hardware from your LMT kit or your own custom hardware.
• 60mm wide shock mount cross braces from your Losi LMT kit or aftermarket cross braces such as the Team PRP aluminum cross braces here in the shop.

STL COMPATIBILITY INFO
• Compatible with Losi LMT kits when used with Shock on Link suspension setups such as TLR Tuned LMT trailing arm lower links.
• Compatible with the Team PRP Ogre X, Team PRP Goblin and Team PRP Goblin Unum chassis kits when used with trailing arm lower links.
• Does NOT fit on the Team PRP S1 Ogre chassis or Ogre 1.5 chassis.
• Does NOT fit on the Team PRP FCR chassis.
• Does NOT fit the stock Losi LMT roll cage.
• Does NOT fit the TLR tuned roll cage.
• Does NOT work with Shock On Axle setups. Use the DUO towers for Shock on Axle.

NOTICE: The stock LMT roll cage and wheelie bar will NOT bolt up to these shock towers. They are designed for Pro Mod racing without the unnecessary attachments.

STL front body post extensions V1 or V2:
Mount your front body posts further toward the front away from the windshield with these carbon fiber body post extensions. Also fits on the new S1 Ogre 1.5 shock towers.

STL Body Post Extensions INCLUDE:
• Carbon Fiber body post mount extensions x2
• V2 has more adjustment holes than V1.
• M3x10 cap head screws x2
• M3x16 cap head screws x4
• M3x18 cap head screws x2
• M3 hex nuts x2
• M3 lock nuts x6
• M3x1mm spacer x2 (for limit strap spacing)
• 55mm black anodized aluminum cross brace x1
• Link to instructions (found on the support page)

STL Body Post Extensions REQUIRE:
• Body posts from your LMT or TLR Tuned LMT kit
• STL shock towers (also fits the Ogre 1.5 shock towers)

BLEMISHED Factory Seconds
• Discounted shock towers.
• May have surface scratches and small chips but the integrity of the piece is not compromised.
• STL V2 blemished towers.
• STL JSE blemished towers (from the Full Bling JSE Ogre X kit).

Pricing and specifications subject to change while we continue to develop and advance our products.