LMT Rear Axle Weight Mount Type-B

Add weight to the rear axle of your Losi LMT balancing the rear static tire grip more closely to the front by using the Team PRP Rear Axle Weight Mount Type-B. Type-B Rear Axle Weight is a longer weight running the length of the axle. It has a form fitting design with the stock LMT plastic axles and attaches to two carbon fiber mounts. Finish it off with the 3d printed cover for a clean integrated look! These Type-B steel weights are the same weight as the original Team PRP RAW axle weights at 43g/ea (86g per pair) with the complete assembly weighing a total of 97 grams.

Type B axle weights WILL NOT work well with Shock on Axle setups! Use our other rear axle weight mount for shock on axle trucks. See the other weight mount in the shop.

Combine this Type B rear weight with our axle caps (SOACAPs) on your front axle for a matching front and rear axle look when using Shock on Link setups. See them in the shop!

RAW Mount Type-B with Steel Weight Set INCLUDES:
• Carbon fiber mounting plates x2.
• Stainless steel Type-B long weights x2.
• 5x2mm Spacers x4.
• Included hardware for 2 weights: M3x16mm cap head screws x2, M3x12mm cap head screws x4 and M3 Locknuts x2.

Raw Mount Type-B REQUIRES:
• Shock on Link setups, aka trailing arm suspension with the shocks attached to the arm/lower link rather than on top of the axle. Stock shock mounts on top of the axle will NOT work well with this weight set without your own custom modifications.
• These are raw cut stainless steel plates and may have sharp edges. You may finish them however you like or leave them as is.

3D Printed Plastic Cover $4.99
• Black plastic cover encases the steel weights and lowers them on the axle.
• Longer weight mounting screws; M3x18 cap head screws x2, M3x22 cap head screws x2.
• Anodized washers NOT included.

Pricing and specifications subject to change while we continue to develop and advance our products.