LMT SOACAPs

Carbon Fiber Shock On Axle Caps (SOACAPs) for Losi LMT axles are used to replace the lower shock mounts on the axles with these small, lightweight, carbon fiber covers while running a shock on link setup such as TLR Tuned trailing arms or our Team PRP trailing arms. Cleans up the look of the axles and adds bracing strength. Sold as 1 pair with mounting hardware to complete 1 axle. You will need 2 sets for a complete truck with 2 axles.

• Optional SOACAP Brass Shims for fine tuning rear axle weight are also available. See info below.

Actual SOACAPs product does not have cutouts shown in prototype photo. Anodized finishing washers are NOT included. Photo with cutouts and washers was a prototype.

Carbon Fiber SOACAPs Include:
• Carbon Fiber SOACAPs x2 (covers one axle).
• M3x12mm screws x4.
• Internal M3x5x2mm spacers x4.

NOTICE!:You will need to order 2 sets to cover 2 axles.

Brass SOACAP weight shims:
Brass SOACAP 5 gram weight shims. Add them underneath the rear axle Carbon Fiber SOACAPs to add weight to the rear axle. Or mount them without the carbon SOACAPS.
• Set of four (4) 1.6mm Brass Shims.
• Each shim weighs 5 grams. All 4 shims add 20 grams total weight.
• Mounting screws are not included with the brass shims.

Option parts:
• The perfect companion is our Type-B Rear Axle Weight. Use 1 set of SOACAPs on the front axle and the Type-B Rear Axle Weight on the rear axle. See it in the shop!