Losi LMT Goblin X chassis kit
Pricing and full specs coming soon.
The dual motor Goblin has evolved! Taking the race-winning, inverted transmission design of the Ogre and Ogre X kits and adapting it into a twin motor, sport mod class dominator! The Goblin X has arrived! The Goblin X converts the center chassis of your Team Losi LMT monster truck, LMT 2.0, Mega Truck or TLR Tuned LMT to a much lower CG, 2S racing machine with the ability to run twin motors on the bottom of the chassis or a single motor positioned on the bottom at mid front or mid rear. The electronics tray may also be positioned front or rear to further tune weight bias.
Designed for advanced hobbyists, racers and those comfortable building kits to high standards.
Be sure you choose the Goblin X kit with the correct wheelbase you plan to use:
LMT1.0 Digger RTR trucks are 13.5" wb. LMT2.0, TLR Tuned, Mega Trucks are 15" wb. 14" wheelbase is a more custom build and requires Ogre "long" trailing arms.
The Goblin X features:
• Twin motor mounts on the bottom of the chassis with the use of a second Losi LMT Idler gear (required for twin motors and sold separately).
• Twin motors on the bottom of the chassis make for a very stable and low cg truck.
• Accepts 2S shorty Lipo batteries with a horizontal orientation, side-chassis-mounted, low cg, adjustable battery compartment.
• Accepts stock Losi LMT and aftermarket shock towers.
• Option to run a single motor with or without the stock gear box.
• Your choice of upper 4-links for shorter 13.5", 14" or longer 15" wheelbases.
• Fits 540 brushed motors and most 540 brushless. Will fit some 550 brushless if you use your building skills and take care in setting up the adjustable battery compartment and spacing it to work with your build.
Goblin X INCLUDES:
• Carbon fiber core center chassis plates (Shock towers sold separately or taken from your donor kit).
• Carbon fiber electronics tray with carbon mounts.
• Carbon fiber battery tray assembly.
• Twin motor transmission assembly (requires 2 Losi LMT idler gears and idler gear shafts when using dual motors).
• CNC machined black anodized aluminum cross braces 66mm x2.
• CNC machined titanium gray anodized upper 4-links: The Goblin X for 13.5"-14" wb will come with 70mm upper links. The Goblin X for 15" wb will come with 90mm upper links.
• RC4wd Long M4 rod ends for upper 4-links.
• M5x13x4 Bearings x2 for the second Losi LMT idler gear.
• Hardware to assemble core chassis components.
• 3D print gear cover.
Goblin X REQUIRES:
• Donor Losi LMT kit.
• Losi LMT Idler Gear: Two (2) Losi idler gears with gear shafts. Losi idler gear set is part# LOS242044 (use the one from your donor kit and then buy a second set).
• Shock towers: May use PRP STL, PRP DUO, stock Losi LMT, TLR Tuned, LMT2.0 or other aftermarket towers depending on your donor kit and shock setup you choose to go with.
• Lower 4-links and with rod ends from your donor Losi LMT kit.
• 14" to 15" wheelbase setups require Mega length center drive shafts trimmed slightly (steps will be shown in instruction manual).
To build a Team PRP Full Spec Goblin X chassis kit you may purchase the following components:
• Team PRP STL or DUO shock towers.
• Team PRP STL front body post extensions.
• Team PRP lower 4-link trailing arms in either the Ogre short 13.5" wb, Ogre long 14" wb lengths or coming soon LMT2.0 15" wb length.
• Ogre Skid Plate will fit the Goblin X but only the outer 4 screws.
• Other parts such as the Titan CF Steering linkage, Titan caster blocks, rear axle weights, etc., are also available.
• Each of these products can be found here in the shop!
• Use the code: COMBO for a discount on 2 or more option parts!
Pricing and specifications subject to change while we continue to develop and advance our products.